n. 互阻;跨阻
CMOS wide band transresistance circuit based on current feedback op is introduced.
介紹了用CMOS電流反饋放大器構成互阻放大器的基本原理。
A circuit of CMOS transresistance amplifier based on current feedback amplifier and its principle are introduced. The circuit is used to implement DVD OPIC.
本文介紹用電流反饋放大器構成的CMOS互阻放大器電路及工作原理,并将其應用於DVD光撿拾集成電路設計中。
Transresistance(跨阻)是電子工程學中的一個專業術語,特指将輸入電流轉換為輸出電壓的增益參數,其核心定義為輸出電壓變化量與輸入電流變化量的比值。該參數在放大器電路(尤其是跨阻放大器)的設計與分析中至關重要,其标準單位為歐姆(Ω)。
定義與物理意義
Transresistance(( Rm ))的數學表達式為: $$ Rm = frac{Delta V{text{out}}}{Delta I{text{in}}} $$ 其中 ( Delta V{text{out}} ) 是輸出電壓變化量,( Delta I{text{in}} ) 是輸入電流變化量。它表征了電路将電流信號線性轉換為電壓信號的能力。
詞源與概念區分
典型應用場景
IEEE 将 transresistance 定義為線性雙端口網絡的混合參數(h-參數)之一,記為 ( h_{21} ),用於小信號模型分析(IEEE Xplore Digital Library)。
在 Adel S. Sedra 與 Kenneth C. Smith 所著的《微電子電路》(Microelectronic Circuits)中,跨阻放大器(Transresistance Amplifier)被明确描述為"電流輸入、電壓輸出"的理想電路模塊,其增益直接由 transresistance 值決定(第 5 版,第 98 頁)。
Transresistance(互阻)是電子工程領域的專業術語,由前綴"trans-"和"resistance"(電阻)組合而成。其核心含義與跨電路元件的電流-電壓轉換特性相關,具體解析如下:
詞源分解
物理定義
Transresistance描述的是輸入電流與輸出電壓之間的比例關系,數學表達式為:
$$
Rm = frac{V{out}}{I_{in}}
$$
其單位為歐姆(Ω),與電阻單位相同,但表征的是跨域能量轉換特性。
工程應用
主要出現在跨阻放大器(Transimpedance Amplifier)設計中,例如:
與類似術語對比
| 術語 | 定義 | 主要應用 |
|---|---|--|
| Transresistance | 電流→電壓轉換 | 跨阻放大器 |
| Transimpedance | 廣義阻抗轉換 | 複雜阻抗網絡分析 |
建議查閱《電子電路基礎》或IEEE标準術語庫獲取更專業的電路模型分析。需注意實際工程中"transresistance"與"transimpedance"存在混用現象,具體含義需結合上下文判斷。
wolfberry fruitWolfgang Amadeus MozartWollaston prismwomen and childrenwomen doctorswonder aboutwonder atwonder ifWonderful Lifewonderful memorieswood carvingwood charcoalwood engravingwood floorwood flooringwood flourwood furniturewood industrywood lacquerwood preservativewood processingwood pulpwood shavingswood stainwood veneerwooden boxwooden casewooden combwooden cratewooden door
我們堅持為全球中文用戶提供準确、可靠的線上工具。
所有工具均遵循我們 “關於我們” 頁面中所述的審核原則進行開發與維護。請注意: 工具結果僅供參考,不構成任何專業建議。