学习工具
[力] 损伤阈值,损坏阈
There exist cleaning threshold and damage threshold in laser cleaning.
激光清洗存在着清洗阈值和损伤阈值。
The method was taken out to improve the damage threshold of two kinds of materials.
还提出了提高这两种膜料的溶胶-凝胶化学膜激光损伤阈值的方法。
The laser work media flows fast, and it has no the thermal lens effect and damage threshold.
激光波长处于大气传输窗口,对大气变化不敏感; 工作物质快速流动,不存在热透镜效应和破坏阈值;
The fatigue damage threshold with a reliability and a confidence is suggested in this paper.
还给出了带有可靠度和置信度的疲劳损伤阀值。
The methods of laser damage detection and laser induced damage threshold (LIDT) were introduced.
介绍了激光损伤的检测及损伤阈值的测量方法。
损伤阈值(Damage Threshold) 指材料、器件或系统在特定条件下(如激光照射、机械应力、电应力等)能够承受而不发生永久性物理损伤或功能失效的最大临界值。这个阈值是衡量其抗损伤能力的关键参数,通常以单位面积上的能量密度(如 J/cm²)、功率密度(如 W/cm²)或峰值强度等物理量来表示。
损伤阈值的测量通常采用逐步升高负载法(如逐步增加激光能量或功率),通过显微镜、光电探测器等观察损伤的发生,并用统计方法(如零损伤概率法)确定阈值。国际标准(如ISO 21254系列)规范了激光损伤阈值的测试流程和定义。
权威来源参考:
“damage threshold”是一个复合术语,结合了damage(损害)和threshold(阈值)的双重含义,常见于工程学、物理学和生物学等领域。以下是详细解释:
Damage(损害)
指物体或系统因外力、环境等因素导致的物理或功能上的破坏。例如:材料断裂、电子元件失效、生物组织损伤等。其核心特征是对原有状态的负面改变(如提到“降低价值、破坏功能”)。
Threshold(阈值)
原意为“门槛”,引申为临界值或界限值。在科学语境中,指触发某种变化或反应的最低/最高限度(如提到“物理学中的临界值”)。
表示“导致损害发生的最小临界值”,即系统或材料在承受压力、能量、温度等外界条件时,从安全状态转变为受损状态的临界点。例如:
| 术语 | 定义 | 领域 |
|---|---|---|
| Threshold voltage | 触发电子设备工作的最小电压 | 电子工程 |
| Fatigue damage | 材料因反复受力导致的累积损伤 | 机械工程 |
| Formation damage | 地层因开采导致的渗透性降低 | 石油工程 |
damage threshold 强调从“无损害”到“有损害”的临界状态,需结合具体场景理解其数值和意义。如需进一步了解专业定义,可参考材料测试标准或相关物理文献。
soft claysoft ferritesoft groundsoft landingsoft palatesoft pillowsoft rocksoft segmentsoft skillssoft soilsoft tissuesoft waresoften upsoftened watersoftening agentsoftening pointsoftening temperaturesoftware companysoftware componentsoftware configurationsoftware designsoftware developmentsoftware engineersoftware engineeringsoftware interfacesoftware metricssoftware packagesoftware piracysoftware reliabilitysoftware reuse
我们坚持为全球中文用户提供准确、可靠的在线工具。
所有工具均遵循我们 “关于我们” 页面中所述的审核原则进行开发与维护。请注意: 工具结果仅供参考,不构成任何专业建议。