fiber orientation是什么意思，fiber orientation的意思翻译、用法、同义词、例句

纤维取向；纤维定向作用

Vf , fiber orientation, fiber surface treatment, load and velocity have an great effect on friction and wear properties of K3D/EP composites.

纤维取向、纤维表面处理以及载荷和速度对K3D/EP复合材料的摩擦磨损性能有很大影响。

Attention was paid on how to lower the production costs in the processing of thermosetting plastics, which covered the fiber orientation, removal of burr and sprue runner material loss.

由于纤维取向、去除飞边和流道料损失等是热固性塑料加工中影响成本的主要问题，故着重介绍了降低上述费用的办法。

The results showed that the fiber orientation distribution was mainly dependent on the shape of the cavity, fiber contents and molding condition.

结果表明，纤维取向分布主要取决于模腔几何形状、纤维含量和注射工艺条件等因素。

The fiber orientation of fiber suspension through two dimensional curved expansion duct is numerically simulated.

本研究数值模拟了弯曲扩张通道纤维悬浮流中的纤维取向分布。

Fiber orientation is the main properties of the parts'microstructure.

并且，纤维取向也是制品微观结构的主要特征。

Based on Hele-Show flow, Dinh-Armstrong model is used to simulate fiber orientation for semiconcentrated short fiber reinforced plastics in injection mold filling.

本文推导了注射成型过程中纤维取向的概率分布函数，并将模拟的结果与以前研究者所做的实验进行了比较。

It was indicated that the fiber orientation inside the rib plays a big role in the forming of the rib shrinkage mark.

研究表明：加强筋内的纤维取向是影响表面缩痕大小的主要因素，树脂基体和成型工艺条件对表面缩痕的影响很小。

The effect of the fiber orientation in non-crimp fabrics on the reinforcing effectiveness of the concrete column cylinders is discussed.

探讨了织物纤维取向不同对系统增强效果的影响。

An image analysis system is designed for the measuring of fiber length distribution and fiber orientation distribution in three dimensions. The detail of programming method is written up.

为纤维增强混凝土中纤维的长度分布和三维取向分布设计了图像处理系统，详细叙述了图像处理系统的设计方法和编程思想。

The mechanical and thermal physic properties depend strongly on the fiber orientation state during injection molding process.

纤维增强复合材料的力学性能和热物理性能依赖于纤维的取向状态。

The effects played by transverse shear deformation, panel geometric parameters, total number of plies, fiber orientation, and initial geometric imperfections are studied.

讨论了横向剪切变形，曲板几何参数，铺层数，铺展方式和初始几何缺陷等各种参数变化的影响。

The practical fiber ODFs of nonwoven fabrics with 4 different processing methods are measured and the data are compared with that of fiber orientation distribution measured by microscope projector.

实际测定了四种不同加工方法的非织造布纤维取向分布函数，并将数据与显微投影法测得的纤维取向分布实测数据进行了比较。

The experimental and the numerical results are compared and the influences of different fiber orientation, ply number and hole diameter on the stress concentration factors are analyzed. Some imp…

并将实验与计算结果进行了比较，分析了不同的纤维配置方向、层数和圆孔直径对应力集中系数的影响。

The results show that the reflectivity of unidirectional CFRP depends on the fiber orientation and thicknesses of laminates.

结果表明，单向纤维铺层CFRP的反射率与纤维方向及层板厚度有关；

By analysis, the fiber orientation streak due to wake, is different from the simple basis weight streak and cannot be eliminated by changing the operating parameters and geometric parameters.

经分析，这种波迹效应引起的纤维定向条纹，不同于简单的定量条纹，改变匀浆辊的运行参数、几何参数并不能消除。

The changing regularity of the deformation and compliance of resin matrix composites with the fiber orientation has been discussed.

讨论了树脂基复合材料的柔度和变形随纤维方向的变化规律。

A structural optimization problem is solved with the fiber orientation and the lamina thickness as the design variables and the LPF load as the objective.

以纤维方向角和层合板厚度作为设计变量，最终失效强度为目标，对结构进行优化。

It was found that the C-scan image of a ply interface contained mostly the fiber orientation information of the two neighboring plies, with that of the upper ply often showing more prominently.

发现铺层界面的C扫描图大都包含两相邻铺层的纤维方向信息，而上铺层的信息显示更明显。

Some common applications include measuring the structural integrity of white matter, mapping white matter fiber orientation, and tracking white matter pathways.

常见的应用包括测量白质结构的完整性、绘白质纤维走向，以及追踪白质路径。

It is shown that the changes in fiber orientation and interfacial bond have great effect on the stress distributions and deformation characteristics of matrix.

研究表明，该类复合材料中基体的应力分布情况和变形特征将受到纤维位向改变和界面结合强弱的显著影响。

The more attention was paid for the effects of matrix, interface and fiber orientation on stress transfer and stress distribution in composite.

研究中主要讨论了基体、纤维和界面的力学性能以及纤维位向的变化对应力传递和应力分布的影响。

The behavior of backscattering of light from nonwoven fabric is mainly dependent upon the physical properties of fibers, the fiber orientation distribution and the area density of nonwoven fabric.

非织造布的光后向散射性质主要取决于纤维的物理性质、非织造布中纤维的取向分布以及非织造布面密度。

Phase functions for fibrous layer are obtained for two types of fiber orientation:randomly oriented in space and randomly oriented in a plane parallel to the boundary surfaces of the layer.

前言：针对纤维层中两种典型的纤维排列求得其相函数：纤维在空间随机排列和平行于边界面的平面上随机排列。

The influence of MMT naonomaterials on the thermal shrinkage performance of PET fiber was investigated by means of WAXD, DSC, fiber orientation measurement, etc.

利用WAXD、DSC和声速法等手段测试纤维的取向、结晶度及结晶形态等的变化，研究蒙脱土的加入对PET纤维热收缩性能的影响。

Using image analysis technology, nonwovens' structure parameters, such as the pore size, pore shape, fiber orientation distribution and so on, were obtained in this paper;

利用计算机图像处理技术，提取了孔隙尺寸、孔隙形状和纤维取向分布等直观表达非织造纤维材料结构的参数；