finite element method是什么意思，finite element method的意思翻译、用法、同义词、例句

[数] 有限元法；[数] 有限单元法

Stress of Al motorcycle wheel under the service condition was analyzed with finite element method (FEM).

用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。

The irregular distribution of the wave load along the erect riser makes the computation of equivalent wave nodal force difficult when applying Finite Element Method to analyze risers strength.

波浪荷载沿垂直立管的分布是不规则的，这对工程中用有限元法分析立管强度进行等效波浪结点力的计算带来困难。

By using finite element method, the deformations of flat membrane mirror have been calculated.

运用有限元法对不同工况下平面薄膜反射镜的变形进行了计算。

The influence is studied in this paper with nonlinear finite element method, as an example, for a high arch dam in design.

采用非线性有限单元法，以设计中的某高拱坝为例，分析建基面强度对坝体应力和变形的影响。

Then, the article derives finite element analysis equilibrium equation and element rigidity matrix in use of nonlinear finite element method.

然后运用非线性有限单元法推导了空间铰接杆单元的刚度矩阵和平衡方程。

A method of determining bifurcation directions at a double eigenvalue is presented by combining the finite element method with the perturbation method.

本文结合有限元法和摄动法给出了一个确定薄板在二重特征值处分支方向的方法。

In this paper, temperature and stress field on the bottom had been simulated using finite element method.

本文运用有限单元法，对钢包底的温度场和应力场进行了数值模拟。

The paper brings the conception of seepage force and use finite element method to analyze rock slope stability under rainfall, based on unsaturated earth drained shear strength theory.

本文以非饱和土抗剪强度理论为基础，引入了渗透力的概念，利用有限单元法进行了降雨条件下岩质边坡稳定性的分析。

The time domain finite difference and the finite element method are more convenient.

有限差分法和有限单元法在时间域里更为方便。

Through the simplification of intensity with the finite element method of data. simulation and discuss both the difference.

经由简化光强度搭配有限元素法所得到的数据，模拟并讨论两者间的差异。

Using the finite element method to analyze the mixing chamber, the temperature distribution as well as the change situation.

利用有限元法对混炼过程中密炼室、胶料的温度分布以及变化情况进行了分析。

The flow field and thermal environment of gap in solid rocket nozzle were simulated by finite element method.

用有限元素法数值模拟了固体火箭发动机喷管内缝隙的流场和热环境。

By comparison, we calculate the same problem by finite element method.

作为比较，我们用有限元法计算了同一问题。

The calculated result is consistent with that by finite element method and transfer matrix method.

与“有限元法”和“传递矩阵法”的计算结果进行了对比，结果基本一致。

The above-mentioned methods are combined to optimize the field of the breaker, and the calculation results are compared with the results calculated by finite element method.

本文将上述方法结合起来对断路器的电场进行优化计算。并将计算结果与有限元法的计算结果进行了分析比较。

This article mainly introduces some similarities and differences between finite volume method and finite element method.

本文主要介绍有限体积法和有限元法之间的一些相同点和不同点。

It combines the merit of the finite element method with that of the finite difference method.

它可以吸收有限元法和有限差分法的一些重要思想与技巧。

The process can be simulated by finite element method theoretically, but reasonable result requires very small meshes.

有限元法理论上可对此进行仿真模拟，但合理的结果要求网格尺寸非常小。

Based on the finite element method, the maximum circumferential stress and stress intensity factor near the tip of mode I V-notch added coating are analyzed numerically.

基于有限元法，对添加涂层后的I型V形切口尖端附近的最大周向应力和应力强度因子进行了数值分析。

In addition, the coupling stiffness of the double rotors was successfully calculated with the finite element method.

文中还利用有限元法有效地解决了主轴双转子耦合刚度的计算问题。

We analysed the stress field and constrained force at attachment margin in human aortic valve by using finite element method.

本文用有限元法分析了人主动脉瓣在正常生理状态下的应力场、附着缘的约束反力。

This paper analyzes the skid-mounted seawater purification equipment using classic mechanics and finite element method. On this basis, the system body is assessed for strength.

本文采用经典力学和有限元法对橇装海水净化设备进行了分析计算，在此基础上对系统本体进行了强度评定。

First contact stress and deformation of parts which have normal shapes and simple contacting status are calculated using Hertz formula and finite element method.

首先，运用了赫兹公式和有限元法对外形规则、接触状态简单的零件进行接触应力和接触变形计算。