metallographic microscope是什么意思，metallographic microscope的意思翻译、用法、同义词、例句

[光][材] 金相显微镜

The company also owns hardness, metallographic microscope, the mechanical properties of aircraft, non-destructive flaw detection equipment.

公司还拥有硬度计、金相显微镜、力学性能实验机，无损探伤等设备。

The fracture section of steel 80 wire rods was analyzed by SEM and metallographic microscope, and the related batch of wire rods was physically tested and chemically analyzed.

用扫描电镜、金相显微镜观察分析了80钢盘条拉拔断裂的断口，并对盘条进行了理化检验分析。

The chemical composition of a new casting alloy is designed. its structure and corrosion behavior are stud, ied by means of metallographic microscOPe, X-ray diffraction, EMPA, TEM, SEM and STM.

本文设计了新型铸造合金的化学成分，采用金相显微镜、X射线衍射、电于探什（EMPA）、透射电镜（TEM）、扫描电镜（SEM）及扫描隧道显微镜（STM）研究了新型铸造合金的组织及其腐蚀行为。

The change of the polished ceramic tile's surface hasbeen observed using metallographic microscope and SEM.

用金相显微镜、扫描电镜观察抛光砖表面孔隙的变化。

The microstructure, phase composition and fracture surface of joint of Mg alloy AZ91D by fiber laser welding were investigated by the metallographic microscope, XRD, SEM and TEM.

采用光纤激光焊接AZ91D镁合金，借助金相显微镜、X射线衍射仪、扫描电镜、透射电镜分别对焊接接头的微观组织结构、相组成、断口形貌进行分析。

The influences of multilayer cladding on the microstructure and hardness of laser-clad layers were studied by metallographic microscope and hardometer.

采用金相显微镜和硬度计研究了多层熔覆对激光熔覆层微观组织和硬度的影响。

A metallographic microscope is used to observe the micrographs of the porous alumina membrane anodized by first and second steps.

用金相显微镜观察了一次阳极氧化和二次阳极氧化后多孔氧化铝的表面形貌。

The microstructure of rods sintered in vacuum and by sinter-HIP was investigated by metallographic microscope, SEM and TEM.

用会相显微镜、SEM和TEM观察了真空烧结、低压烧结试样的显微结构。

Metallographic microscope is suitable for research in metallography, metallurgy laboratory professionals.

特点 Features；金相显微镜适用于金相学、冶金学专业实验室的研究。

The fracture of a steel rail was analyzed by means of metallographic microscope, SEM and EDS.

金相学是用金相显微镜和电子显微镜对金属和合金的显微结构的研究。

Optical metallographic microscope and electron-probe testing methods are used to analyze the fine crack, spall and fine cleft of U71Mn heavy rail tread.

采用光学金相显微镜和电子探针分析仪等测试方法对U71Mn重轨踏面发纹、缺损和小裂口缺陷进行了分析。

This paper summarizes the construction principle, resolution power and amplification about the system of compuer-metallographic microscope.

概述了计算机-金相显微镜系统的建立原则、系统的分辨率和放大倍数。

By means of chemical analysis, mechanical test, metallographic microscope, energy spectrometer and SEM, Failure analysis for Ω-type corrugated pipe of heat supply pipeline was carried out.

通过化学分析、力学试验、金相显微镜、离子光谱仪、能普仪及扫描电镜等测试手段对输热管道Ω型波纹管开裂溢漏进行了失效分析。

The facture failure of the slab was analyzed by means of metallographic microscope, SEM and EDS.

采用金相检验、扫描电镜观察和能谱分析等方法对断坯进行了分析。

Macro examination, metallographic microscope, microhardness tester and X ray diffractometer were utilized to study the failure reasons for connecting rode bearing bush of automobile engine.

采用宏微观检验、显微硬度测定、X射线衍射等方法对汽车发动机连杆轴瓦的失效进行了分析。

The microstructure of the coating is analysed with metallographic microscope and X ray diffractometer.

用金相显微镜和X射线衍射仪分析涂层的显微组织。

The microstructure was studied using metallographic microscope, and their mechanical properties were analyzed through tensile test and hardness test.

采用金相显微镜研究了其微观组织，并通过拉伸试验及硬度测试对其力学性能进行了分析。

The surface cracks on steel sheet DB685 was analyzed by metallographic microscope and scanning electron microscope.

用金相显微镜和扫描电镜分析方法，对DB685钢板表面裂纹进行分析。

The microstructure and fractography of the samples were respectively observed by metallographic microscope and SEM.

利用金相显微镜、扫描电镜对试样的显微组织、断口形貌进行观察；

The distribution of particle size of the milled powder was observed by metallographic microscope.

用扫描电子显微镜观察分析粉末的微观形貌变化。

The microstructures of the alloy on different states were studied by optical metallographic microscope, XRD and SEM, the morphology of tensile fracture surface was also investigated.

通过光学显微镜、X射线衍射仪、扫描电镜和能谱分析等手段对热轧板材不同状态的显微组织进行了研究并观察了拉伸断口形貌。

Then the tissue of Fe-Al intermetallic compound coating was observed by Metallographic Microscope and Scanning Electron Microscope.

采用金相显微镜、扫描电子显微镜（SEM）研究Fe-Al金属间化合物复合涂层的组织。

The causes to burst of high temperature reheating pipe of the power plant are analyzed by means of metallographic and scanning electron microscope.

利用金相显微镜和扫描电镜等分析手段，分析了电厂高温再热管爆裂原因。

Metallographic structure, Scanning electron microscope analysis test.

金相组织、扫描电子显微镜分析试验。

This paper, through taking macro \u0026 micro observation and analysis of metallographic, chemical composition and crack microscope on the reinforced-bar, expounds what roots the trouble is resulted from.

从热轧带肋钢筋断裂的宏观观察、微观观察、金相组织、化学成分和裂纹显微分析，找出引起热轧带肋钢筋裂纹、断裂的原因，得出断裂的根源。

With electron microscope the fracture surface and metallographic structure analysis is done for typical sample of Q235, Q345 plate of low elongation, its reason found out, some suggestions proposed.

用电镜对邯钢Q235，Q345中板伸长率低的典型试样进行了断口、金相组织分析，找出了试样断后伸长率低的原因，提出了相应的改进建议。

After metallographic preparation, microstructure of prepared coatings is analysed under an optical microscope to investigate the quality of fabricated coating.

经过金相学处理后，样品被放在光学显微镜下，对其显微结构进行详细研究以分析实际制备后的涂层的质量和缺陷。

|metalloscope/metallurgical microscope;[光][材]金相显微镜