当前位置:乐沙网 > 英语单词大全 > solidification cracking的意思

solidification cracking是什么意思,solidification cracking的意思翻译、用法、同义词、例句

输入单词

常用词典

  • 硬化裂纹

  • 例句

  • Solidification cracking is a critical problem during the welding of nickel-based corrosion-resistance materials.

    镍基耐蚀材料的焊接结晶裂纹是该类材料焊接性研究中的关键性问题。

  • Trans-varestraint test was used to investigate the solidification cracking mechanism of 690 nickel-based alloy surfacing metal.

    采用横向可调拘束试验方法研究了690镍基合金焊带堆焊金属的结晶裂纹形成机理。

  • In order to predict the tendency of low-expansion superalloys on weld solidification cracking, the modified M-F model was used to simulate solute redistribution in weld solidification.

    为研究低膨胀高温合金的焊缝结晶裂纹倾向,利用改进的M F模型进行焊接凝固过程溶质再分布的模拟。

  • Some plastic regions could be found and some dimples had been observed on the fracture surfaces of the solidification cracking of austenitic-ferritic weld metals.

    少量铁素体的焊缝凝固裂纹断口上有许多小塑性区,有明显的韧窝。

  • It is found that there are solidification cracking within argon arch welding joint between heat exchange pipe and pipe plate and stress corrosion cracking on its surface.

    对某台加热器发生泄漏的部位进行了金相、扫描电镜检查,检查出换热管与管板的氩弧焊缝内部存在结晶裂纹且表面存在应力腐蚀裂纹。

  • Solidification cracking is a frequent and serious welding defect during 690 alloy electro-slag surfacing process.

    在690合金焊带电渣堆焊过程中,结晶裂纹是发生最为普遍和影响最为严重的缺陷之一。

  • It was found that the solidification cracking susceptibility of weld metal increases remarkably as nickel content increases.

    结果表明:随着焊缝中含镍量的增加,焊缝金属的凝固裂纹敏感性增大。

  • Analysis shows that the solidification cracking was always formed and developed along film-like sulphides at columnar grain boundaries.

    分析认为,凝固裂纹是沿偏聚在柱状晶晶界的低熔点膜状硫化物形成并扩展的。

  • As a result, a 2-D temperature field model for welding solidification cracking was developed.

    在此基础上,建立了二维焊接凝固裂纹温度场计算模型。

  • Heater leak occurs by direct reason of the stress corrosion cracking, while by other reasons of solidification cracking, small fusion depth of welding joint and non…

    应力腐蚀裂纹是造成加热器泄漏的直接原因,结晶裂纹、焊缝熔深小及坡口底部未熔透也是加热器泄漏的原因。

  • Its tendency to solidification hot cracking large than conventional 300-series austenitic stainless steel.

    其凝固热裂纹倾向与常规的300系列奥氏体不锈钢不同。

  • The solidification analysis on shot cracking proved that hot cracking was influenced by the cooling rate of alloy under uncompensated stage of solidification process.

    理论分析认为,合金在不可补缩区的冷却速率变化是改变合金热裂程度的重要因素。

  • Dynamic cracking behaviors of weld solidification cracks for aluminum alloys at elevated temperature;

    进行了不锈钢焊接凝固裂纹温度场分析与数值模拟。

  • The mechanical fiber reinforcement in Solidification or in the drying process can be reduced to prevent cracking.

    在凝固或干燥过程中产生的机械能被纤维筋减弱,防止龟裂。

  • And massive project practice already confirmed that it can effectively prevent welding hot cracking if the welding metal first precipitation ofδ-ferrite solidification (FA) mode.

    大量工程实践和实验研究已经证实,如果焊逢金属以先析出δ铁素体的FA模式凝固,可以有效地防止焊接热裂纹。

  • Directional solidification could improve hot rolling formability of magnesium ingot effectively. The total deformation could reach 94% without cracking when hot rolling was held at 673K.

    定向凝固工艺可有效提高镁合金铸锭的热轧成形能力,在轧制温度为673K的条件下进行热轧,总变形量可达94%以上而不出现裂纹。

  • 网络扩展资料

    solidification

    solidification是指物质从液态或气态逐渐转变为固态的过程。在冶金、材料科学、地质学和化学等领域中,solidification都是一个常见的术语。

    例句:

    • The solidification process of molten metal can be affected by the cooling rate. (熔融金属的固化过程可以受到冷却速率的影响)

    用法:

    solidification通常用于描述材料的凝固过程,如金属、陶瓷、塑料等。同时,该词也可以用于描述其他物质的状态转变,如水从液态变为冰态的过程。

    近义词:

    crystallization、freezing、condensation

    反义词:

    melting、liquefaction

    cracking

    cracking是指材料或物质在外部作用下出现裂纹或断裂的现象。它是一种广泛存在于材料科学、机械工程、化学工程等领域中的现象。

    例句:

    • The cracking of the glass was caused by the sudden change in temperature. (玻璃的开裂是由于温度的突然变化引起的)

    用法:

    cracking通常用于描述材料或物质的损伤或破坏现象,如金属、陶瓷、混凝土等的断裂。此外,该词也可以用于形容语言或声音的发出和传递的声音。

    近义词:

    fracture、splitting、fissure

    反义词:

    solidity、integrity、cohesion

    英语单词大全 请记住链接:https://danci.yuesha.com/solidification+cracking.html

    展开全部内容
    更多工具: