finite element analysis是什么意思，finite element analysis的意思翻译、用法、同义词、例句

[数] 有限元分析

Advance a new detection which associate with Finite Element Analysis and testing basing on testing of large hydraulic mechanical's fact press is true or not.

基于大型液压机实际压力是否达标的检测，提出了应用有限元分析和测试技术相结合的一种检测新方法。

The three dimensional non linear finite element analysis of the transient temperature field during intermediate frequency quenching of diesel crankshaft was simulated by using of ANSYS.

利用ANSYS有限元分析软件，采用三维非线性有限元方法对柴油机曲轴中频淬火瞬态温度场进行了模拟计算；

This paper simulates the temperature field associated with laser surface quenching using ANSYS - a finite element analysis software, and a series of studies are carried out based on this simulation.

本文结合先进的大型有限元分析软件ANSYS，对激光表面淬火的温度场进行有限元模拟，并在此基础上，对此展开一系列研究。

In this context, the authors also look at the merits of applying advanced, non linear Finite Element Analysis to design truck transmissions.

本文还注意到应用改进轴承的优点，用非线性有限元分析去设计货车变速箱。

Do you have any views on the future of finite element analysis development?

您对有限元分析发展前景的有什么看法?。

This paper suggests a finite element analysis method of the multilayer pavement with materials of nonlinearity.

本文提出了一个考虑材料非线性的多层路面应力分析的有限单元法。

We ran finite element analysis stress calculations to determine where the frame needed to be reinforced for maximum strength and stiffness, then reinforced those areas with additional carbon fiber.

我们跑应力有限元分析计算，确定了框架需要得到加强的最大强度和刚度，然后加强这些领域更多的碳纤维。

There is no explicit formulation of inverse mapping about the isoparametric element, so inverse mapping is avoided in finite element analysis.

由于等参元不存在逆变换的显式，所以在有限元分析的列式中都回避等参元逆变换。

By analysing the process of hydraulic nail making machine, we find out which part under the biggest force and use UG do finite element analysis, then we promote improvement program.

通过分析液压制钉机的工作过程，找出机体中受力最大的部位，然后运用UG软件对它进行有限元分析，并提出改进方案。

Based on finite element analysis, set up the model of the boiler steel-structure in the ANSYS and got its response to the strong seism.

基于有限元分析方法，首先建立了锅炉钢构架ANSYS计算模型，对其在强震作用下的地震反应进行了分析。

This paper focuses on the use of finite element analysis software, the threshing cylinder axis static finite element analysis process.

为此，着重研究了利用有限元分析软件对脱粒滚筒轴进行有限元静力分析的过程。

By an example, it shows that equivalent method is reliable and practical in the finite element analysis.

通过一个具体的算例，证明了在有限元分析中等效方法的合理性和正确性。

Entity model from modeling can be directly used in motion simulation analysis and finite element analysis, which shortens the design time and reduces the data exchange between softwares.

建模所得的实体模型直接用于运动仿真分析和有限元分析，缩短了设计所需的时间，减少了软件间的数据交换。

Spot welds are the dominant joining method to make automotive bodies, for finite element analysis of body structure, A spot weld model must be establish.

点焊是汽车车身结构常用的一种连接方式，为对这种结构进行有限元分析必须建立相应的点焊模型。

This text introduces systematically: Simulation and finite element analysis of cross helical gear.

本文系统地介绍了交错轴斜齿轮的仿真及有限元分析。

It shows that finite element analysis could replace experiments to study the crack width of reinforced concrete beams in a way.

说明有限元分析在某种程度上可以代替试验对钢筋混凝土梁裂缝宽度进行研究分析。

The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method.

本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响；

This topic through a section bus half load bearing type body frame finite element analysis computation, seeks the truly feasible body frame lightweight way.

本课题通过一款大客车的半承载式车身骨架有限元分析计算，寻求确实可行的车身骨架轻量化途径。

Finite element analysis shows that there are three stress concentration areas inside the bearing.

有限元分析表明，轴承内部存在三个应力集中区域。

The temperature distribution and stress distribution of blast furnace tuyere with gradient coating have been studied using finite element analysis software, comparing with uniform coating.

采用有限元分析软件研究了梯度涂层高炉风口的温度分布和应力分布，并与均匀涂层进行了比较。

Experimental results verify the correctness of the finite element analysis results.

实验分析结果验证了有限元分析的正确性。

For this reason the substructure method of finite element analysis is a useful means for stress analysis of large structure.

因此，子结构有限元分析方法是大型结构应力分析的有效方法，具有推广使用的价值。

The similarity between equivalent stress distribution around the holes in cylindrical shell and its plate model is shown through finite element analysis.

有限元分析表明，开孔圆柱壳与其相应的平板模型在开孔附近的等效应力分布非常相似。

Static test and finite element analysis indicate that this strain multiplier have the advantage of good linear response.

静载实验和有限元分析表明，这种应变倍增器具有良好的线性响应。

This new element can be incorporated into conventional finite element analysis schemes, to analysis the cable structures with sliding cable in service or under construction.

新单元可直接用于常规的有限元分析，研究在工作状态或施工中存在连续长索滑移的索结构。

This paper introduces the steps of developing parametric finite element analysis by APDL and put a cylinder spring as an example expatiates the realization process in detail.

文章介绍了采用APDL进行参数化有限元分析的实施步骤，并以圆柱弹簧为例，详细阐述了这一过程的实现。

Finally, research achievements offered by this paper have reference for the further non linear finite element analysis and design of reinforced concrete structure.

本文研究成果对进一步开展混凝土结构的非线性有限元分析和设计具有参考价值。

According to the basic structure and operating principle of wedge backstop, analyzes the wedge for mechanics and gives the finite element analysis by ANSYS software.

根据接触式楔块逆止器的基本结构及工作原理，对楔块进行力学分析，并利用ANSYS软件进行有限元分析。

Then brief the basic situation of the finite element analysis method and the spectrum tube design situation.

接着介绍了有限元分析方法的基本情况和光谱简的设计情况；

|Abaqus;[数]有限元分析