resistance to abrasion是什么意思，resistance to abrasion的意思翻译、用法、同义词、例句

磨蚀阻力

The evaluation and traditional testing methods of magnetic recording media's resistance to abrasion are discussed.

本文介绍了磁记录介质耐磨性的评价方法和传统的耐磨性测试方法。

It is mainly used as rubber reinforcement and filler, to improve their elongation, tear strength and resistance to abrasion.

主要用作橡胶制品的补强剂和填充剂，能明显改善橡胶制品的抗拉强度、抗撕裂性和耐磨性。

The ceramic-lined steel composite pipe has exceptional resistance to abrasion. Its service life in materials transportation with hard abrasives is more than 20 times longer than in common steel pipe.

陶瓷内衬复合钢管具有优异的耐磨损性，其使用寿命是普通钢管的20倍以上。

Industry production testing needle enterprises, selection of carbon tool steel materials, with strong resistance to abrasion;

业生产测试针企业，选用碳工具钢材料，具有耐磨性强；

Superior resistance to abrasion but also high chemical affinity to iron which results in being unsuitable for steel machining.

优越的耐磨性，还具有高化学亲和力正在为中铁钢材加工不当的结果。

The rock resistance to abrasion is one of the key elements which influence the degree of the cutter attrition and it has close relationship with the rock physical mechanics.

岩石的耐磨性是影响刀具磨损程度的关键因素之一，岩石耐磨性与岩石的物理力学指标以及岩石自身性质有着密切的联系。

It features excellent colour retention, resistance to abrasion, impact, seawater and mineral oil . Also resistance to splashes of aliphatic solvent and vegetable oil .

具有保色性好，耐磨、耐碰撞、耐海水和矿物油等。也耐脂肪族溶剂和植物油的溅污。

Copper applications are limited due to its low tensile strength, poor resistance to abrasion and common acids.

铜的应用是有限的，由于其拉伸强度低，耐磨性差，共同氨基酸。

High speed automatical winding is possible because of resistance to abrasion.

出众的耐磨性为高速自动卷线提供可能。

It shows that the hardness of laser overlaying advance 2 times, the resistance to abrasion advances 5 times.

分析表明激光堆焊层硬度提高了2倍，耐磨性提高了5倍，耐蚀性能满足应用要求。

To some extent, the hardness of a material is indicative of its resistance to abrasion and wear characteristics.

另外，这种材料的硬度象征着它的耐磨性与抗老化性。

The results show that there are higher grain grade and hardness, lower dilution and better performance of resistance to abrasion, wear and anti-erosion in the laser cladding layer.

激光熔覆层中的组织晶粒度和硬度高，稀释率低，抗摩擦磨损和抗腐蚀性能好；

For surfacing welding the surface which has resistance to abrasion.

常温硬度堆焊。如车轴等磨损面。

The results indicted that the better resistance to abrasion for deformed low chromium semi-steel could be obtained by making use of a given suitable heat treatment with residual deformed temperature.

结果表明：该钢变形后经适当的余热热处理可获得较高的耐磨性能。

PU extruded belts are available in Round, V shape, rectangular and other shape. The hardness of the product ensure excellent resistance to abrasion and greasy or oil.

PU胶带有圆形，V形，方形及其它多边形可选，产品的硬度能保证胶带耐磨，抗油污、油脂；

It requires the guide plate has a high resistance to abrasion, heat fatigue and impact toughness.

这要求导卫板具有较高的耐磨性，抗热疲劳性和冲击韧性。

Antimicrobial and oil resistance, resistance to abrasion, hydrolysis, non-halogen, flame retardant.

耐油、抗微生物和水解、抗机械磨损，无卤、阻燃。

Hardy cable production PUR polyether every day of the sheath control cable, water resistance, oil resistance, resistance to abrasion, ripstop.

耐寒电缆天天生产PUR聚醚类外护套控制电缆，抗水解，耐油，耐磨，抗撕裂。

High mechanical strength, resistance to press, impact resistance to abrasion.

机械强度高、耐重压、耐冲击、耐磨耗。

PUR polyether kind of the sheath control cable, water resistance, oil resistance, resistance to abrasion, ripstop.

PUR聚醚类外护套控制电缆，抗水解，耐油，耐磨，抗撕裂。

Wear resistance test shows that there is an increasing trend of resistance to abrasion with increase of laser energy.

耐磨性试验表明，随着能量的增加，耐磨性有提高的趋势。

By anti-frozen performance, resistance to abrasion, contraction and resistance to fatigue and other durability tests to examining the mixture ratio of the double mineral composite powder concrete.

通过抗冻性、抗渗性、耐磨性、收缩性以及抗疲劳性等耐久性试验对研究中所确定的配合比进行检验，最终得出复合双掺矿质超细粉路面混凝土的最佳配合比。

It shows that the hardness of laser overlaying advance 2 times, the resistance to abrasion advances 5 times. It has practical value on decanter centrifuge blade.

分析表明激光堆焊层硬度提高了2倍，耐磨性提高了5倍，耐蚀性能满足应用要求。

It is obvious that the laser beam scanning speed is an important factor effecting on the microstructure, hardness and the resistance to abrasion of the alloy surface.

对不同扫描速度下合金层的显微组织、硬度、耐磨性进行了测试和分析。

The effects of fiber twist and dipping treatment on the mechanical properties and resistance to abrasion and wear of ultrahigh molecular weight polyethylene (UHMWPE) fiber were studied.

研究了纤维的捻度及浸胶处理对超高相对分子质量聚乙烯（UHMWPE）纤维力学性能及摩擦磨损性能的影响。

Through experimental analysis we have obtained a new way to improve the resistance to abrasion concrete.

本文最后通过试验分析得出实现混凝土提高抗冲耐磨性能的一般途径。