sucker rod pump是什么意思，sucker rod pump的意思翻译、用法、同义词、例句

有杆泵；杆式泵

For the purpose of environmental protection and pump efficiency improvement, tubing draining and anchoring is necessary for sucker rod pumping.

油管泄油和锚定是有杆泵采油系统必不可少的配套设备，用来防止环境污染及提高抽油泵泵效。

In the past a few years, the accidents of the tubing break in sucker rod pumping wells in Daqing oil field have been happening with increasing frequency.

近年来，大庆油田抽油机油管断裂事故日益频繁，给油田造成巨大的经济损失。

The sucker rod pumping is one of the traditional oil production methods in the petroleum industry at home and abroad, which is in the lead of mechanical oil production in the world.

有杆泵采油是世界石油工业传统的采油方式之一，也是迄今在采油工程中一直占主导地位的机械采油方式。

In this thesis, a method to recognize downhole dynagraphs of wire rope sucker rod pumping unit utilizing artificial neural network (ANN) and computer image processing technology is studied.

本文介绍了利用人工神经网络（ ANN）技术和计算机图像处理技术对钢丝绳柔性抽油杆抽油装置进行故障诊断的方法。

This paper expounds comprehensively the necessity for diagnosing the faults of a sucker rod pumping system and the history there of—from analog diagnosis to numerical diagnosis.

本文首先综述了有杆泵抽油系统故障诊断的必要性及其发展历史：从模拟诊断到数值模拟诊断。

Hydraulic feedback hollow sucker rod pump solves the problem of downward movement of the hollow rod on a certain extent.

液力反馈型空心杆抽油泵在一定程度上缓解了抽油杆下行困难的问题。

At present, in deep well production, sucker rod pump is widely applied, the ordinary steel pumping rod cant meet the need of actual producing because of it' s weight and strength.

目前国内外应用最广泛的有杆泵深抽技术中，普通钢杆由于重量、强度等性能影响，难以满足实际生产的需要。

The technology adopts biased-valve oil well pump, coiled steel rod and rotary wellhead parts, which form the technological pipe string for the lift of the sucker rod pump in highly-deviated wells.

该配套技术采用偏置阀式抽油泵、钢质连续抽油杆和旋转井口装置等部件，并配套组成了大斜度井有杆泵举升工艺管柱。

It is difficult for sucker rod pump to adapt to special environment (i. e. , offshore platform) at present time, so that a new hydraulic drive pumping unit has been developed.

针对目前有杆抽油机难于适应特殊环境（如海上平台）的特殊要求的现状，研制了一种新型液压抽油机。

When using the mechanical recovery method with sucker rod pump in directional and horizontal wells, it needed install to centralizer on sucker rod string.

在定向井、水平井中使用有杆泵机械采油方法时，需要在抽油杆柱上安装扶正器。

The problem and its solution method of the sucker rod pump oil producing system in directional well was introduced.

介绍了斜井有杆泵采油系统在生产中存在的问题及解决方法。

The smooth length of brass or steel rod that moves up and down through the stuffing box or packing gland of a sucker rod pump.

用于有杆泵的经盘根盒或盘根压盖上下移动的一根光滑的黄铜杆或钢杆。

Combining with practical application, the factors that influence sucker rod pump performance are studied in this dissertation.

本文结合工程实际，对影响有杆抽油泵性能的因素进行了比较深入的研究。

The performance of sucker rod pump has close relation to economic benefit of oil field.

本文结合工程实际，对影响有杆抽油泵性能的因素进行了比较深入的研究。

Inflow performance of oil well, as a major external factor of influencing sucker rod pump performance, is studied.

油井流入动态是影响抽油泵性能的外部重要因素。

Pump dynamometer card shape directly reflects the characteristics of different factors that influence the working performance of sucker rod pump performance.

泵功图的形状直接反映着抽油泵受不同因素影响下的特征。

This article recommends the process of direct quenching after carburizing for sucker rod pump liners.

介绍了抽油泵衬套渗碳后直接淬火处理工艺。

The import content of implementing production method with sucker rod pump in high deviating holes is ascertaining pumping parameter and pump efficiency.

确定抽汲参数和泵效是实现大斜度井有杆抽油系统的重要内容。

The mechanics model and the mathematical model in optimizing design of rod string and tubing system were expound emphatically, when sucker rod pump oil producing were used in directional well.

着重阐述了在斜井上采用有杆泵开采时，系统杆管优化设计的力学模型和数学模型，使设计与现场实际应用的符合率达90 %以上。

Sucker rod pump units are widely used in oil extraction in our country. However, due to limitations of devices and technologies, most sucker rod pumps run under low efficiency in oilfield.

有杆抽油泵在我国众多的油井中得到了广泛使用，然而由于设备水平和采油工艺的局限，在现场使用的大部分有杆抽油泵的存在效率低下的问题。

For 51 / 2 casing radius of curvature in the horizontal wells have not sucker rod pump wells down to the level of, and can not be overcome-and the eccentric wear problems.

针对51/2“套管中曲率半径水平井有杆抽油泵无法下至水平井段，并无法克服杆、管偏磨的难题。

A cylinder that is abrasion and corrosion resistant, shock proof, and antimagnetic that is used to protect the polished rod on a sucker-rod pump.

为保护有杆泵上的光杆所用的抗磨蚀和抗腐蚀的防震和抗磁的圆筒。

A type of artificial pump using a sucker-rod pump driven by an vertical pneumatic cylinder mounted on the wellhead.

由装在井口装置上的立式气动缸驱动的一种有杆泵。抽油杆柱由气动缸中的活塞上的气体压力带动。

The rod provides a connection on a sucker-rod pump between the sucker-rod string and the bridle on the pumping unit.

光杆提供在抽油杆柱与抽油机上的钢丝绳之间提供连接。

The control of constant liquid level is beneficial to raise pump effect and reduce lose rate of equipments such as the sucker rod and pump etc.

恒液面控制有利于提高泵效，降低抽油杆柱和泵等设备的失效率。

The load reducing tool for deep well pumping is connected on the sucker rod above the subsurface pump, some hundreds or up to a thousand meters up from the pump according to actual conditions.

深抽助力装置是用抽油杆连接在井口到抽油泵之间的一种采油工具，根据需要可与抽油泵相隔数百米甚至上千米。

Through field application, it effectively prevents off-center wear of sucker rod, and prolongs pump detection period.

现场应用，收到了防止管杆偏磨，延长检泵周期的良好效果。

Why the greater errors will be produced in computing the weight of sucker rod and the pressure at pump exit by traditional method is analyzed.

分析了用传统方法计算抽油杆柱自重和泵出口压力时产生较大误差的原因。

New-type centralizers clamped on sucker rod string is developed to stabilize the sucker rod string in a screw pump oil production system.

为了解决螺杆泵采油井杆柱有效扶正问题，研制开发了卡装式抽油杆扶正器。

The twisting vibration characteristic analysis of the sucker rod string for progressing cavity pump oil production system;

在对旋转抽油杆柱的扭转振动分析的基础上 ，给出了各阶扭转振动固有特性参数的计算式 。

Basic reason that causes partial wear seriously between sucker rod and tube and the cycle of pump inspection shorten has been gained, which is not totally caused by up force after polymer flooding.

得出抽油杆管严重偏磨及检泵周期缩短的根本原因并不完全是聚合物驱后上顶力增加造成的。

After oil reservoir having reached to high water cut during the development of oil field, the lopsided wearing of tubing and sucker rod is the main reason of checking pump.

油田开发进入高含水期后，管杆偏磨是导致油井检泵作业的主要原因。

The electric heating subsurface pump is a pump combining the monobarrel pump with the electric heating sucker rod.

电加热抽稠泵是将整筒抽油泵和电加热抽油杆结合为一体的抽油泵。

|insert pump;有杆泵；杆式泵